With the target series that always pushes its members to the boundaries of power & flavor, now introducing the TARGET PM80 SE, a single 18650 battery edition of the TARGET PM80, brings longer enjoyment of vaping. It's a sub-ohm pod mod powered by the advanced AXON chip, with 80W max output, making it capable of delivering flavor instantly. It adopts GTX coils of both DTL and restricted DTL options, satisfying various tastes and clouds preferences. It's the TARGET PM80 SE that unveils a whole optimal vaping journey for you within a beautiful design.
The biggest pet peeve for most vapers when it comes to Pod Mod's is refilling and changing coils. Never fear though Vaporesso have come to the rescue with this new Pod kit. The Target PM80 features replaceable coils to keep costs to minimum and with the removal of the Press-To-Fill (PTF) system, leaking and overfilling is a thing of the past.
The iconic Vaporesso PTF is replaced with a sturdy and simple silicone plug, and with a simple lift and twist you will discover the oval filling port with a more than generous filling capacity of 4ml. You won't be experiencing any filling problems, because filling this pod is the easiest of all Pod Mods to date! The majority of the pod is made with a clear material which perfectly displays the remaining juice levels. Vaporesso have designed and constructed this pod with care and precision allowing juice to drop below a comfortable level while maintaining coil saturation.
Coils are simply pressed into the base of pod while flat edges guide the coil into the correct orientation to maintain a good connection with the contact points. Strong magnets are used to hold the pod firmly in position so there is no chance of your pod going walkabouts. Flavour and coil life is exceptional thanks to the mesh coil heating element and fast wicking action.
The Mod - AXON Chip
The Target PM80 Mod has a built-in 2000mah Li-Ion battery making it the largest built in Pod Mod on the market. You'll be making fewer trips to the charger that's for sure. The impressive small size also features a large 0.96 inch colour TFT display with ample measurements and modes displayed. Once the coil is installed and read by the AXON chip you will see a rated wattage range which will guide you to ensure the best flavour possible. Variable Wattage mode allows the user to define a set wattage while Smart Variable Wattage will automatically set the best wattage based on which coil is installed. Variable Voltage is also available for simplicity and output.
The ergonomic design allows the device to be held comfortably in the hand with a large curved fire button the sits well in either the index finger or thumb. Stability and charging speed is another plus when it comes to the Target PM80 SE Pod Mod. Placement on any surface is very sturdy thanks to its well designed base which also allows this device to be charged sitting upright. Up to 2A charging means you can be topped up in under an hour!
*All images are for display purpose only. Final product may differ.
*This device requires one 18650 battery to operate. Battery is sold separately.
Please Note: It is essential to remove the pod from the PM80 SE if the device is not in regular use (10 to 15 puffs per hour). Not doing so can result in leakage and future damage to your device. This happens due to pressure loss in the pod. As with all high flow pod systems, regular cleaning is required around and under the pod.
Features & Specs
- Sub-ohm for DTL
- Max Output of 80W
- Compact Design
- Replaceable GTX Coils
- GTX 0.2Ω Mesh Coil (45–60W)
- GTX 0.6Ω Mesh Coil (20-30W)
- 0.91 inch OLED Display
- 5-80w output
- Powered by a replaceable single 18650 battery (not included)
- Fast Charging upto 2A
- TARGET PM80 SE Device
- 2 x VAPORESSO TARGET PM80 POD (4ml)
- GTX 0.2Ω MESH COIL
- GTX 0.6Ω MESH COIL
- 2 x Airflow silicone plugs
- USB Cable
- User Manual
- Warranty Card
- Reminder Card
*Battery is sold separately.
This product does not contain nicotine.
Customer ReviewsWrite a review
While I love the original, and definitely prefer the smaller form factor, there's a couple of things that make the SE my preferred device - firstly, it remembers the wattage setting you choose (the original will reset to the recommended wattage whenever you refill, or sometimes randomly when the atomizer doesn't register... the recommended settings are too high in my opinion, and burn the coils out quickly). Secondly, it's really convenient to be able to swap out the battery with a fully charged one when you're low on power. Thirdly - it should *theoretically* outlast the original (the built in LiPo battery will diminish over time, whereas you can just buy a new 18650). Battery lasts all day for me. I highly recommend the .3 and .6 ohm coils & wattage set to slightly below the recommended minimum.
The pm80 is a great device, the coils seem to last with great flavour. Good air flow to the coils. I've vapped for a long time and found this mod is one of the best. 80 watts is plenty as very rarely do you go to 80 watts.
Using a 3000 mah battery it only lasts about 8 hours when vaping at 45 watts. My PM80 on a 2000 mah internal battery lasts 14 hours vaping at 55 watts. I use the PM80 Se mainly as a backup now. Pods could be better with a top fill instead of bottom fill.
Been using for 3 weeks, compared with my target mini it is so good, battery lasts nearly 2 days and only need to fill juice once in morning vape 350 puffs per day. The flavour is much better too. I really like how the pod attaches with strong magnets and how the pod is all clear so you can easily see the juice level. I'm using the 1.2 ohm at 10watts, tried the 0.6 but was too hot on the lips. Overall really happy with it , though I'm a newbie only been vaping 2 months and only had the target mini to compare with.
Very nice little vape. Great functions. Pity they have some known flaws which causes it to stop working after a few weeks. I've been through 2 SE models and 2 of the normal PM80s in 6 months.