Target PM80 Pod Mod Kit by Vaporesso is set to be the most powerful Sub-Ohm Pod Mod device to hit the market. Vaporesso have done it again with this little pod mod which packs a mighty punch when sized up with the competition. This device is capable of reaching a max output of 80W with a built-in 2000mAh battery, and is equipped with 0.001’s insta-fire AXON chip which brings power and extra intelligence to a direct to lung device. The Target PM80 Pod Mod exceeds all requirements and expectations for the real Sub-Ohm direct-to-lung vapers :-).
The biggest pet peeve for most vapers when it comes to Pod Mod's is refilling and changing coils. Never fear though Vaporesso have come to the rescue with this new Pod kit. The Target PM80 features replaceable coils to keep costs to minimum and with the removal of the Press-To-Fill (PTF) system, leaking and overfilling is a thing of the past.
The iconic Vaporesso PTF is replaced with a sturdy and simple silicone plug, and with a simple lift and twist you will discover the oval filling port with a more than generous filling capacity of 4ml. You won't be experiencing any filling problems, because filling this pod is the easiest of all Pod Mods to date! The majority of the pod is made with a clear material which perfectly displays the remaining juice levels. Vaporesso have designed and constructed this pod with care and precision allowing juice to drop below a comfortable level while maintaining coil saturation.
Coils are simply pressed into the base of pod while flat edges guide the coil into the correct orientation to maintain a good connection with the contact points. Strong magnets are used to hold the pod firmly in position so there is no chance of your pod going walkabouts. Flavour and coil life is exceptional thanks to the mesh coil heating element and fast wicking action.
The Mod - AXON Chip
The Target PM80 Mod has a built-in 2000mah Li-Ion battery making it the largest built in Pod Mod on the market. You'll be making fewer trips to the charger that's for sure. The impressive small size also features a large 0.96 inch colour TFT display with ample measurements and modes displayed. Once the coil is installed and read by the AXON chip you will see a rated wattage range which will guide you to ensure the best flavour possible. Variable Wattage mode allows the user to define a set wattage while Smart Variable Wattage will automatically set the best wattage based on which coil is installed. Variable Voltage is also available for simplicity and output.
The ergonomic design allows the device to be held comfortably in the hand with a large curved fire button the sits well in either the index finger or thumb. Stability and charging speed is another plus when it comes to the Target PM80 Pod Mod. Placement on any surface is very sturdy thanks to its well designed base which also allows this device to be charged sitting upright. Up to 2A charging means you can be topped up in under an hour!
*All images are for display purpose only. Final product may differ.
Please Note: It is essential to remove the pod from the PM80 if the device is not in regular use (10 to 15 puffs per hour). Not doing so can result in leakage and future damage to your device. This happens due to pressure loss in the pod. As with all high flow pod systems, regular cleaning is required around and under the pod.
Features & Specs
- Sub-ohm for DTL
- Max Output of 80W
- Compact Design
- Replaceable GTX Coils
- GTX 0.2Ω Mesh Coil (45–60W)
- GTX 0.3Ω Mesh Coil (32-45W)
- 0.96 inch OLED Display
- 5-80w output
- Built-in 2000mAh
- Fast Charging upto 2A
- TARGET PM80 Battery
- VAPORESSO TARGET PM80 POD (4ml)
- GTX 0.2Ω MESH COIL
- GTX 0.3Ω MESH COIL
- USB Cable
- User Manual
- Warranty Card
- Reminder Card
Customer ReviewsWrite a review
Unfortunately, mine had to be returned for a refund as it leaked at the contact points, then died within 2 weeks of use. The design isnt very good, as to refill you have to turn it upside down, remove the plug and fill, but have to block up the mouthpiece with tissue other wise the liquid flows out of that. Not recommended. If you want a more reliable model go with the target nano.
Bought as a gift for family member to transition off cigarettes. Simple & easy to use with great flavour. Only downside is the battery life. Hope lower range coils are in mind for the PM80.
Thanks team VO² for the quick dispatch and hassle free shopping experience!
First off VapourOxide will now be my goto shop due to their excellent service and pricing. I bought this as an upgrade for the misses and to my surprise the flavour out does ALL my mods, absolutely insane. The coils prime VERY easily so I wouldn’t get too carried away, so overall we’re very happy and I might just get one myself.
As a long time Vaper (12+ years) I have tried, tested and used almost every system. I am not a squonker or a rebuilder, I look for simplicity. I can tell you, new and old alike, this is the one system that has answered my vape wishes. The only CON is the bottom filling, which has been fixed with the PM30 kit. the GTX Coil (0.02 OHM) are the BOMB. WARNING!! Don't make the mistake I did and recharge it using a wall charger (unless you know the wattage) you will fry your battery, which I did. I am excited to get my hands on the PM80 SE upon its local release, all the power with a single 18650 Yeah baby!!!
Not a bad pod mod, Could be better with top filling. Could also do with smaller wattage coils (around 20 watts)